Eagle Hot Food Tables, Spec-Master ® series, model PHT4OB-120 enclosed base design. Top and body to be heavy gauge type 430 stainless steel (Open Front or Sliding Doors). Beaded top openings to be 12.1˝ x 20.1˝. Heating compartments to be 8˝ deep, galvanized, and insulated on all four sides and bottom with 1˝ fiberglass or equal. Recessed control panel with individual thermostatic controls. Each compartment fitted with 750-watt tubular heating element above the insulated bottom. 6´ cord and plug. Complete unit wired to master toggle switch with indicator light. Furnished with polycarbonate cutting board. Includes 5˝-diameter swivel plate casters (two with brake).
Construction :
- Table body and top constructed of highly polished heavy gauge 430 series stainless steel.
- Top has die-stamped beaded openings measuring 12.1˝ x 20.1˝ (307 x 510mm).
- A poly cutting board 8˝ wide x 0.5˝ (203 x 13mm) thick is mounted on drop brackets located on control side of unit.
- 5˝ (127mm) diameter NSF-approved ball bearing swivel casters (two with brake).
- Push bar attached to end panel at operator’s right.
- Full perimeter bumper guards.
Controls :
- Individual thermostatic controls offer a wide range of temperature settings.
- Indicator light remain on continuously while control is on.
Heat Compartments :
- Each heat compartment is 8˝ (203mm) deep and lined with 22 gauge galvanized steel.
- Each compartment is insulated on all four sides and bottom with 1˝ (25mm) thick fiberglass or equal.
Electrical :
- Each compartment is fitted with a 750-watt tubular element above the insulated bottom.
- A six-foot cord with plug will extend from the righthand control side as standard equipment.
- Complete unit is wired to a master toggle switch with indicator light.
- 120-volt units are single phase.
Additional details :
- Spec-Master Portable Hot Food Table
- electric
- 66.25"W x 30.5"D x 34"H
- (4) 12" x 20" (dry) wells with thermostatic controls
- stainless steel top with 8" poly cutting board mounted on drop brackets
- push bar
- stainless steel enclosed base with open front
- full perimeter bumper guards
- 5" NSF-approved ball bearing swivel casters (2 with brake)
- 120v/60/1-ph
- 25.0 amps
- 3000w
- NEMA 5-50P
- 6' cord & plug
- NSF cULus